Tap Drill Size Chart

14.7 mm Drill Size

metric drill

14.7 mm 0.5787 in 14.70 mm

A 14.7 mm drill measures 0.5787 in. It taps 3 threads in this chart.

What a 14.7 mm drill taps

Every thread this drill cuts between 50% and 85% of thread, deepest first. Outside that band it is the wrong drill for the job, so nothing below that line is listed.

Threads a 14.7 mm drill taps, with the percent of thread each one gets and the published chart drill for comparison.
Thread % thread Chart drill Chart %
M16 x 1.5 66.7% 14.5 mm 77.0%
5/8-18 64.2% 37/64″ 65.0%
M16 x 2 50.0% 14 mm 77.0%

Drills either side

All drill sizes → · Open this drill in the calculator →

14.7 mm drill: common questions

What size is a 14.7 mm drill?
0.5787 inches, which is 14.70 mm. It is a metric drill.
What can I tap with a 14.7 mm drill?
3 threads: M16 x 1.5 at 66.7%, 5/8-18 at 64.2%, M16 x 2 at 50.0%.
What drill is next to a 14.7 mm?
Down: 37/64 in at 0.5781 in. Up: 14.8 mm at 0.5827 in.