Tap Drill Size Chart

18.5 mm Drill Size

metric drill

18.5 mm 0.7283 in 18.50 mm

A 18.5 mm drill is the standard tap drill for M20 x 1.5.

What a 18.5 mm drill taps

Every thread this drill cuts between 50% and 85% of thread, deepest first. Outside that band it is the wrong drill for the job, so nothing below that line is listed.

Threads a 18.5 mm drill taps, with the percent of thread each one gets and the published chart drill for comparison.
Thread % thread Chart drill Chart %
M20 x 1.5 chart drill 77.0% 18.5 mm 77.0%
M20 x 2 57.7% 18 mm 77.0%

Drills either side

All drill sizes → · Open this drill in the calculator →

18.5 mm drill: common questions

What size is a 18.5 mm drill?
0.7283 inches, which is 18.50 mm. It is a metric drill.
What can I tap with a 18.5 mm drill?
2 threads: M20 x 1.5 at 77.0%, M20 x 2 at 57.7%.
Is a 18.5 mm drill the standard tap drill for anything?
Yes, for M20 x 1.5 (77.0% thread). That is the size published tap and drill charts give.
What drill is next to a 18.5 mm?
Down: 18.4 mm at 0.7244 in. Up: 18.6 mm at 0.7323 in.